Trioctyl trimellitate, with the CAS number 3319 - 31 - 1, is a high - quality chemical product offered at a low price. It has a molecular formula of C₃₃H₅₄O₆. This compound is a colorless to pale - yellow liquid. It has a relatively high boiling point, typically around 414 °C at 760 mmHg, and a density of approximately 0.986 g/mL at 25 °C. The refractive index of Trioctyl trimellitate is about 1.484 at 20 °C. Its flash point is quite high, usually around 232 °C, which indicates good thermal stability and safety in some industrial applications.
Trioctyl trimellitate has a wide range of uses. One of the primary applications is as a plasticizer. In the plastics industry, it is added to polyvinyl chloride (PVC) and other polymers to improve their flexibility, durability, and processability. For example, in the production of PVC films, sheets, and cables, Trioctyl trimellitate can reduce the glass - transition temperature of the polymer, making it more pliable and less brittle. It also has good resistance to extraction by oils, water, and solvents, which is crucial for products that will be exposed to such environments. In addition, it is used in the production of synthetic rubber. It can enhance the performance of the rubber by increasing its elasticity and reducing its hardness, resulting in rubber products with better shock - absorption and sealing properties. Moreover, it can be used in some lubricant formulations. It can improve the lubricity of the lubricants, reducing friction and wear between moving parts.
When using Trioctyl trimellitate as a plasticizer for PVC, the following steps can be followed. First, pre - mix the appropriate amount of Trioctyl trimellitate with other additives such as stabilizers and pigments in a suitable mixer. The recommended dosage usually ranges from 20% to 50% by weight, depending on the desired properties of the final product. Then, add the PVC resin to the pre - mixed solution and continue mixing until a homogeneous mixture is obtained. Next, the mixture can be processed through extrusion, injection molding, or calendering to form the desired PVC products. When using it in synthetic rubber, it should be added during the rubber compounding process. Mix it thoroughly with other rubber - compounding ingredients such as sulfur, accelerators, and fillers on a two - roll mill or an internal mixer. The dosage should be adjusted according to the specific requirements of the rubber product. For lubricant applications, it can be blended with base oils and other additives. The blending process should be carried out under appropriate temperature and agitation conditions to ensure uniform dispersion.
Case 1: In a PVC cable manufacturing company, they used Trioctyl trimellitate as a plasticizer. Before using this product, their PVC cables had relatively poor flexibility, which made installation difficult. After switching to this high - quality Trioctyl trimellitate, the cables became much more flexible. The bending radius of the cables was reduced by 30%, making them easier to install in tight spaces. The cables also showed improved resistance to oil and water, which increased their service life in harsh environments. The production efficiency increased by 20% due to the better processability of the PVC compound. Case 2: A rubber products factory used Trioctyl trimellitate in the production of automotive seals. The original seals had a high hardness and poor sealing performance. After adding the appropriate amount of Trioctyl trimellitate, the hardness of the seals decreased, and the sealing performance improved significantly. The leakage rate of the seals was reduced from 5% to less than 1%, which met the strict quality requirements of automotive manufacturers. Moreover, the wear resistance of the seals was also enhanced, extending their replacement cycle and reducing maintenance costs for automotive users.
If you have any questions or need further information about this product, please feel free to contact us. Our email address is info@vivalr.com, and our phone number is (86) 15866781826.
This is William, CEO of Zhishang Chemical Co., Ltd.
Welcome to visit our factory . As the top chemical manufacturer, we have been striving for product quality, innovation , R&D, and customer service for the past 7 years. In the next 10 years or even longer, we are committed to becoming the most reliable chemical supplier in the world , creating a well-known international brand trusted by customers, with the spirit of “one meter wide, ten thousand meters deep”, we continue to focus on product research and development, continue to focus on customer service, continue to improve the supply chain service system, to create a professional chemical supply service team, to achieve win-win long-term cooperation. Please feel free to contact us if you have any questions.