User Guide: High Quality 2,4,6-Tri-tert-butylphenol Cas 732-26-3 With Good Price

Table of Contents

• Basic Information and Parameters
• Uses of the Product
• How to Use the Product
• Use Case Studies
• Contact Information

Basic Information and Parameters

High Quality 2,4,6-Tri-tert-butylphenol Cas 732-26-3 is a high - purity chemical compound. Its chemical formula is C₁₈H₃₀O. It has a clear chemical structure with three tert - butyl groups attached to the phenol ring at the 2, 4, and 6 positions. The product is known for its high quality and comes at a very competitive price in the market.

Physically, it usually appears as a white or slightly off - white crystalline powder. It has a melting point typically in the range of 94 - 96 °C and a boiling point around 277 - 278 °C. The density of the product is approximately 0.92 g/cm³. These physical properties are crucial as they determine how the product behaves under different environmental conditions and how it can be stored and handled.

Uses of the Product

High Quality 2,4,6-Tri-tert-butylphenol Cas 732-26-3 has a wide range of applications in different industries. In the polymer industry, it is used as an antioxidant. Polymers are prone to oxidation, which can lead to degradation of their mechanical and physical properties over time. By incorporating this compound into polymers, the oxidation process can be significantly slowed down, thereby extending the lifespan of polymer products such as plastics, rubber, and fibers.

In the lubricant industry, it serves as an additive to enhance the performance of lubricants. It can improve the oxidation stability of lubricants, reduce the formation of sludge and varnish, and protect engine components from wear and corrosion. This makes it an essential ingredient in high - performance lubricants used in automotive, industrial machinery, and aerospace applications.

How to Use the Product

When using High Quality 2,4,6-Tri-tert-butylphenol Cas 732-26-3 in the polymer industry, it is typically added during the polymer synthesis or compounding process. The recommended dosage usually ranges from 0.1% to 1% of the total polymer weight, depending on the type of polymer and the specific application requirements. It should be thoroughly mixed with the polymer to ensure uniform distribution within the polymer matrix.

In the lubricant industry, it is added to the base oil during the lubricant formulation stage. The addition rate is carefully calculated based on the performance requirements of the lubricant. It is important to follow the recommended safety procedures when handling this chemical, including wearing appropriate protective clothing, gloves, and goggles to avoid direct contact with the skin, eyes, or inhalation of dust.

Use Case Studies

Case 1: A plastic manufacturing company was experiencing rapid degradation of their polypropylene products. After adding High Quality 2,4,6-Tri-tert-butylphenol Cas 732-26-3 at a dosage of 0.5% during the compounding process, they noticed a significant improvement in the product's resistance to oxidation. The products maintained their mechanical strength and appearance for a much longer time, which led to an increase in customer satisfaction and a reduction in product returns.

Case 2: An automotive lubricant manufacturer was looking to improve the performance of their engine oil. By incorporating this product as an additive at a carefully determined concentration, the oxidation stability of the engine oil was enhanced. The oil was able to withstand higher temperatures and longer service intervals without significant degradation. This not only reduced the frequency of oil changes for vehicle owners but also improved the overall performance and longevity of the engines.

Contact Information

If you have any questions or need further information about High Quality 2,4,6-Tri-tert-butylphenol Cas 732-26-3, please feel free to contact us. Our email address is info@vivalr.com, and our phone number is (86) 15866781826.