High Quality Alginic Acid with CAS number 9005 - 32 - 7 is a natural polysaccharide extracted from brown seaweed. It is a linear copolymer consisting of β - D - mannuronic acid (M) and α - L - guluronic acid (G) residues, linked together in different sequences and proportions. The physical appearance of alginic acid is a white to yellowish - brown powder. It is odorless and tasteless, and insoluble in water, ethanol, and other organic solvents. However, it can form viscous solutions or gels in the presence of divalent cations such as calcium ions.
The molecular weight of alginic acid can vary widely, typically ranging from tens of thousands to millions of Daltons, which affects its viscosity and gelling properties. The ratio of M to G residues also has a significant impact on its performance. A higher G content usually leads to stronger and more brittle gels, while a higher M content results in more flexible and elastic gels.
Alginic acid has a wide range of applications in various industries:
Industria alimentaria: It is used as a thickener, stabilizer, and emulsifier in many food products. For example, it can be added to ice cream to prevent the formation of ice crystals, improve texture, and increase shelf - life. In salad dressings, it helps to maintain a uniform consistency and prevent oil separation.
Industria farmacéutica: Alginic acid is used in the formulation of tablets and capsules as a binder and disintegrant. It can also be used in wound dressings due to its ability to absorb exudate and promote wound healing. Additionally, it is used in antacid formulations to form a protective layer on the stomach lining.
Biotechnology and Biomedical Fields: It is used in tissue engineering as a scaffold material due to its biocompatibility and ability to form gels. It can also be used for the encapsulation of cells and drugs, providing controlled release.
When using alginic acid, the following steps should be followed:
Preparación: First, weigh the appropriate amount of alginic acid powder according to the specific application requirements. If necessary, pre - hydrate the powder in a small amount of water or other solvents to ensure uniform dispersion.
Dissolution or Gel Formation: For applications where a solution is required, slowly add the alginic acid powder to the solvent under continuous stirring to avoid clumping. If gel formation is desired, add a divalent cation source, such as calcium chloride solution, in a controlled manner to initiate gelation. The concentration of the alginic acid and the cation source, as well as the temperature and pH of the system, should be carefully controlled to achieve the desired gel properties.
Aplicación: Once the alginic acid solution or gel is prepared, it can be applied to the target system. For example, in food applications, it can be added directly to the food product during the manufacturing process. In wound dressing applications, the alginic acid - based material can be placed on the wound surface.
Caso 1: Producción de helados: A large ice cream manufacturer was facing issues with ice crystal formation and poor texture in their products. They decided to use alginic acid as a stabilizer. By adding 0.2% alginic acid to their ice cream formulation, they were able to significantly reduce ice crystal size, improve the smoothness and creaminess of the ice cream, and extend its shelf - life. Customer feedback indicated a higher satisfaction rate, and sales increased by 15% within a few months.
Case 2: Wound Healing: A hospital tested an alginic acid - based wound dressing on patients with chronic wounds. The dressing was able to absorb a large amount of exudate, maintaining a moist environment at the wound site. This promoted faster wound healing and reduced the risk of infection. In a group of 50 patients, 80% showed significant improvement in wound healing within 2 weeks, compared to a control group using traditional dressings.
If you have any questions or need further information about High Quality Alginic Acid CAS 9005 - 32
Este es William, CEO de Zhishang Chemical Co., Ltd.
Le invitamos a visitar nuestra fábrica. Como el fabricante de productos químicos superior, nos hemos estado esforzando para la calidad del producto, la innovación, el R&D, y el servicio de atención al cliente por los últimos 7 años. En los próximos 10 años o incluso más, nos comprometemos a convertirnos en el proveedor de productos químicos más fiable del mundo, creando una marca internacional conocida en la que confíen los clientes, con el espíritu de "un metro de ancho, diez mil metros de profundidad", seguimos centrándonos en la investigación y el desarrollo de productos, seguimos centrándonos en el servicio al cliente, seguimos mejorando el sistema de servicio de la cadena de suministro, para crear un equipo profesional de servicio de suministro de productos químicos, para lograr una cooperación a largo plazo en la que todos ganen. No dude en ponerse en contacto con nosotros si tiene alguna pregunta.
Spanish 
English (United States) 
English (Australia) 
Portuguese