Nickel(II) chloride hexahydrate, with the CAS number 7791 - 20 - 0, is a well - known inorganic compound. Its chemical formula is NiCl₂·6H₂O. This product typically appears as bright green, crystalline solid. It has a molar mass of approximately 237.69 g/mol.
The melting point of nickel(II) chloride hexahydrate is about 80°C, at which it loses its water of crystallization. It is highly soluble in water, and the solubility in water at 20°C is around 254 g/100 mL. It is also soluble in ethanol and ammonia.
When stored, it should be kept in a cool, dry place, away from incompatible materials such as strong oxidizing agents and alkalis. Exposure to air may cause it to absorb moisture over time.
Nickel(II) chloride hexahydrate has a wide range of applications. In the field of electroplating, it is a key component in nickel electroplating baths. It helps to deposit a nickel layer on various substrates, enhancing their corrosion resistance and improving the surface hardness. This is widely used in the automotive, aerospace, and electronics industries to protect components from wear and tear and environmental damage.
In organic synthesis, it serves as a catalyst. For example, it can catalyze the reaction of Grignard reagents with organic halides, promoting the formation of carbon - carbon bonds, which is crucial in the production of complex organic compounds.
It is also used in the production of nickel catalysts. These catalysts are used in hydrogenation reactions, which are important in the petrochemical industry for converting unsaturated hydrocarbons to saturated ones.
**Electroplating**:
- First, prepare the electroplating bath. Dissolve an appropriate amount of nickel(II) chloride hexahydrate in deionized water according to the specific requirements of the electroplating process. Usually, the concentration ranges from 20 - 50 g/L.
- Adjust the pH of the bath to the optimal value, which is typically around 3 - 4, using suitable acids or alkalis.
- Clean the substrate thoroughly to remove any dirt, grease, or oxide layers. Then, immerse the substrate and the anode (usually a nickel plate) into the electroplating bath. Connect the power supply, and control the current density and plating time according to the desired thickness of the nickel layer.
**Organic Synthesis**:
- Add a catalytic amount of nickel(II) chloride hexahydrate to the reaction mixture. The amount of catalyst depends on the nature of the reactants and the reaction conditions, usually ranging from 1 - 10 mol%.
- Stir the mixture well and heat it to the appropriate reaction temperature. Monitor the progress of the reaction using analytical techniques such as thin - layer chromatography or gas chromatography.
**Automotive Industry Electroplating Case**: A major automotive parts manufacturer was facing issues with the corrosion resistance of their engine components. They used nickel(II) chloride hexahydrate in their electroplating process. After optimizing the electroplating parameters, such as a current density of 2 A/dm² and a plating time of 30 minutes, they were able to deposit a uniform and dense nickel layer on the engine components. The corrosion resistance test showed that the components could withstand salt - spray exposure for over 500 hours without significant rusting, which was a significant improvement compared to the previous coating method.
**Organic Synthesis Case in Pharmaceutical Industry**: A pharmaceutical company was trying to synthesize a new drug intermediate. By using nickel(II) chloride hexahydrate as a catalyst in the reaction of a specific Grignard reagent with an organic halide, they were able to achieve a high yield of over 80%. The reaction time was also significantly reduced from several hours to less than an hour, which increased the overall productivity of the synthesis process.
If you have any questions or need further information about our Factory Supply Nickel(II) chloride hexahydrate CAS 7791 - 20 - 0, please feel free to contact us. Our email is info@vivalr.com, and
Este es William, CEO de Zhishang Chemical Co., Ltd.
Le invitamos a visitar nuestra fábrica. Como el fabricante de productos químicos superior, nos hemos estado esforzando para la calidad del producto, la innovación, el R&D, y el servicio de atención al cliente por los últimos 7 años. En los próximos 10 años o incluso más, nos comprometemos a convertirnos en el proveedor de productos químicos más fiable del mundo, creando una marca internacional conocida en la que confíen los clientes, con el espíritu de "un metro de ancho, diez mil metros de profundidad", seguimos centrándonos en la investigación y el desarrollo de productos, seguimos centrándonos en el servicio al cliente, seguimos mejorando el sistema de servicio de la cadena de suministro, para crear un equipo profesional de servicio de suministro de productos químicos, para lograr una cooperación a largo plazo en la que todos ganen. No dude en ponerse en contacto con nosotros si tiene alguna pregunta.
Spanish 
English (United States) 
English (Australia) 
Portuguese