User Guide for Factory Supply perfluorodecyltriethoxysilane cas 101947-16-4 With Best Price

Table of Contents

• Basic Information and Parameters
• Product Uses
• Product Usage
• Usage Case
• Contact Information

Basic Information and Parameters

The product is Factory Supply perfluorodecyltriethoxysilane with the CAS number 101947 - 16 - 4. It is a high - quality chemical produced under strict factory control, ensuring that it meets the highest industry standards.

Chemical Formula: C₁₆H₂₅F₁₇O₃Si
Molecular Weight: Approximately 610.43 g/mol
Appearance: Usually a colorless to light - yellow liquid
Boiling Point: Around 200 - 220°C (decomposes)
Density: 1.35 - 1.45 g/cm³ at 25°C
Solubility: It is insoluble in water but soluble in common organic solvents such as toluene, xylene, and acetone.

Product Uses

Perfluorodecyltriethoxysilane has a wide range of applications in various industries:

1. Coating Industry: It can be used as an additive in coatings to improve the water - repellency, oil - repellency, and anti - contamination properties of the coating. This makes the coated surface easier to clean and more resistant to environmental factors.
2. Textile Industry: When applied to textiles, it imparts soil - release and stain - resistant properties. Fabrics treated with this product are suitable for outdoor clothing, upholstery, and industrial workwear.
3. Electronics Industry: It can be used to protect electronic components from moisture and dust. By forming a thin, hydrophobic layer on the surface of electronic devices, it helps to prevent corrosion and electrical malfunctions.
4. Medical Industry: In some medical applications, it can be used to modify the surface properties of medical devices, such as catheters and implants, to reduce the adhesion of bacteria and other biological substances.

Product Usage

Before using the perfluorodecyltriethoxysilane, it is crucial to follow these steps:

1. Surface Preparation: The surface to be treated should be clean, dry, and free of any grease, dirt, or other contaminants. It can be cleaned using appropriate solvents or cleaning agents.
2. Dilution: If necessary, the product can be diluted in a suitable organic solvent according to the specific application requirements. The dilution ratio should be carefully determined based on the nature of the surface and the desired performance.
3. Application Method: There are several application methods available, including spraying, dipping, and brushing. The choice of method depends on the size and shape of the object to be treated. For example, spraying is suitable for large - area applications, while dipping is more appropriate for small parts.
4. Curing: After application, the treated surface needs to be cured under appropriate conditions. This usually involves heating the surface at a specific temperature for a certain period of time to ensure the proper formation of the protective layer.

Usage Case

Let's take the coating industry as an example. A paint manufacturer wanted to improve the performance of their exterior wall paint. They added perfluorodecyltriethoxysilane to the paint formulation at a concentration of 2%.

First, the surface of the exterior walls was thoroughly cleaned and primed. Then, the modified paint was applied using a spray gun. After the paint dried and cured at room temperature for 24 hours, a durable and water - repellent coating was formed on the wall surface.

During the following rainy season, it was found that water droplets easily rolled off the wall surface, and the wall remained dry and clean. Moreover, the coating showed excellent resistance to dirt and pollution, and there was no obvious discoloration or peeling after several months of exposure to the outdoor environment. This case clearly demonstrates the effectiveness of perfluorodecyltriethoxysilane in enhancing the performance of coatings.

Contact Information

If you have any further questions or need more information about this product, please feel free to contact us: