Our Factory Supply Perfluoro(2-methyl-3-pentanone) with Cas No. 756-13-8 is a high - quality chemical product. It has excellent physical and chemical properties. The molecular formula of Perfluoro(2-methyl-3-pentanone) is C6F12O. It is a colorless, odorless, and non - conductive liquid. The boiling point of this product is relatively low, which makes it easy to volatilize without leaving any residue. It has high dielectric strength and thermal stability, making it suitable for a variety of applications. The purity of our product can reach up to 99% or even higher, ensuring its high - quality performance in different scenarios.
This product has a wide range of uses. One of the most significant applications is in the fire - extinguishing field. Due to its non - flammable, non - conductive, and low - toxicity properties, it can be used as an environmentally friendly fire - extinguishing agent. It can quickly and effectively suppress fires, especially in places where sensitive electronic equipment is located, such as data centers, server rooms, and control rooms. In addition, it can also be used in the electronics industry as a cleaning agent. It can remove grease, dust, and other contaminants from electronic components without causing any damage to the components. Moreover, it is used in the laboratory as a solvent for some special chemical reactions because of its good chemical stability.
When using Perfluoro(2-methyl-3-pentanone) as a fire - extinguishing agent, it can be stored in special fire - extinguishing equipment. In case of fire, the equipment can be activated to spray the agent onto the fire source. The agent will quickly evaporate, absorbing a large amount of heat and diluting the oxygen concentration around the fire, thereby extinguishing the fire. When using it as a cleaning agent in the electronics industry, it can be applied by spraying, soaking, or wiping. Before using, make sure that the electronic components are powered off to avoid any electrical short - circuits. For laboratory use, it should be used in a well - ventilated environment, and appropriate protective equipment such as gloves and goggles should be worn.
In a large - scale data center, a small fire broke out in one of the server racks. The traditional water - based fire - extinguishing system was not suitable because it would damage the electronic equipment. The data center had installed a fire - extinguishing system filled with our Perfluoro(2-methyl-3-pentanone). Once the fire was detected, the system was automatically activated. The agent was quickly sprayed onto the fire source, and within seconds, the fire was completely extinguished. After the incident, the server rack was inspected, and it was found that there was no damage to the electronic components, and the normal operation of the data center was quickly restored.
In an electronics manufacturing factory, they used our product as a cleaning agent for circuit boards. They soaked the circuit boards in a tank filled with Perfluoro(2-methyl-3-pentanone) for a few minutes. After that, they took out the circuit boards and let them dry. The cleaning effect was excellent, and all the contaminants on the circuit boards were removed. Moreover, the product did not corrode the circuit boards, ensuring the quality of the products.
If you have any questions or need further information about our Factory Supply Perfluoro(2-methyl-3-pentanone) Cas 756-13-8, please feel free to contact us. You can reach us via email at info@vivalr.com or call us at (86) 15866781826.
Este é o William, Diretor Executivo da Zhishang Chemical Co., Ltd.
Bem-vindo a visitar a nossa fábrica. Como o principal fabricante de produtos químicos, temos nos esforçado para a qualidade do produto, inovação, P & D e atendimento ao cliente nos últimos 7 anos. Nos próximos 10 anos ou mais, estamos empenhados em nos tornarmos o fornecedor de produtos químicos mais confiável do mundo, criando uma marca internacional bem conhecida e de confiança dos clientes, com o espírito de "um metro de largura, dez mil metros de profundidade", continuamos a nos concentrar na pesquisa e desenvolvimento de produtos, continuamos a nos concentrar no atendimento ao cliente, continuamos a melhorar o sistema de serviço da cadeia de suprimentos, para criar uma equipe profissional de serviços de fornecimento de produtos químicos, para alcançar uma cooperação de longo prazo ganha-ganha. Por favor, não hesite em contactar-nos se tiver alguma dúvida.