Dodecyltrimethoxysilane, with the CAS number 3069-21-4, is a type of organosilane compound. It has a long - chain dodecyl group attached to the silicon atom through a carbon - silicon bond. The chemical formula of dodecyltrimethoxysilane is C₁₅H₃₄O₃Si. It typically appears as a colorless to light - yellow liquid.
Some of its important physical properties include a boiling point in the range that is suitable for various industrial applications. The density is also within a specific range, which affects its behavior in different media. It is soluble in common organic solvents, making it easy to incorporate into different formulations.
1. Surface Modification: Dodecyltrimethoxysilane is widely used for surface modification. It can be applied to the surfaces of various materials such as glass, metals, and ceramics. By forming a thin layer on the surface, it can improve the hydrophobicity of the surface. This is useful in applications where water - repellent properties are required, like in the construction industry for treating building facades to prevent water penetration.
2. Adhesion Promotion: In the adhesive and coating industries, it can act as an adhesion promoter. It helps to improve the bonding strength between different materials. For example, when applying a coating on a metal substrate, the addition of dodecyltrimethoxysilane can enhance the adhesion of the coating to the metal, increasing the durability of the coating.
3. Fillers Treatment: It can be used to treat fillers in polymer composites. By treating fillers such as silica or calcium carbonate with dodecyltrimethoxysilane, the compatibility between the filler and the polymer matrix can be improved. This leads to better mechanical properties of the composite materials, such as increased strength and toughness.
1. Surface Treatment: First, clean the surface to be treated thoroughly to remove any contaminants. Then, prepare a solution of dodecyltrimethoxysilane in an appropriate organic solvent. The concentration of the solution can vary depending on the specific application, usually in the range of 1% - 10%. Apply the solution to the surface by spraying, dipping, or brushing. After application, allow the surface to dry at an appropriate temperature for a certain period to ensure the formation of a stable layer.
2. Incorporation into Adhesives and Coatings: When using it in adhesives or coatings, add dodecyltrimethoxysilane to the formulation during the mixing process. The amount added should be carefully controlled according to the requirements of the final product. Stir the mixture well to ensure uniform dispersion of the silane in the adhesive or coating system.
3. Filler Treatment: For filler treatment, mix the filler with a solution of dodecyltrimethoxysilane in a suitable solvent. The ratio of the silane to the filler depends on the type and amount of filler. After mixing, remove the solvent by evaporation under appropriate conditions. Then, the treated filler can be used in the production of polymer composites.
Case 1: Construction Facade Waterproofing
A building in a coastal area was facing the problem of water seepage through the exterior wall. The facade was made of concrete. A solution of 5% dodecyltrimethoxysilane in ethanol was prepared. This solution was sprayed on the exterior surface of the concrete wall. After the treatment, the hydrophobicity of the wall surface increased significantly. Water droplets rolled off the surface easily, and the water seepage problem was effectively solved. The treated wall remained in good condition for several years, protecting the interior of the building from moisture damage.
Case 2: Epoxy Coating on Metal
In a metal manufacturing plant, an epoxy coating was used to protect metal parts from corrosion. However, the adhesion of the coating to the metal was not satisfactory, and the coating tended to peel off over time. Dodecyltrimethoxysilane was added to the epoxy coating formulation at a concentration of 3%. After the addition, the bonding strength between the coating and the metal increased significantly. The coated metal parts passed the salt - spray test with much better results, indicating improved corrosion resistance and longer service life.
Este é o William, Diretor Executivo da Zhishang Chemical Co., Ltd.
Bem-vindo a visitar a nossa fábrica. Como o principal fabricante de produtos químicos, temos nos esforçado para a qualidade do produto, inovação, P & D e atendimento ao cliente nos últimos 7 anos. Nos próximos 10 anos ou mais, estamos empenhados em nos tornarmos o fornecedor de produtos químicos mais confiável do mundo, criando uma marca internacional bem conhecida e de confiança dos clientes, com o espírito de "um metro de largura, dez mil metros de profundidade", continuamos a nos concentrar na pesquisa e desenvolvimento de produtos, continuamos a nos concentrar no atendimento ao cliente, continuamos a melhorar o sistema de serviço da cadeia de suprimentos, para criar uma equipe profissional de serviços de fornecimento de produtos químicos, para alcançar uma cooperação de longo prazo ganha-ganha. Por favor, não hesite em contactar-nos se tiver alguma dúvida.
Portuguese 
English (United States) 
English (Australia) 
Spanish