The product we are introducing is Factory Supply Tetraethylene glycol dimethyl ether with CAS number 143 - 24 - 8. Tetraethylene glycol dimethyl ether, also known as tetraglyme, is a colorless, odorless, and hygroscopic liquid. It has a molecular formula of C10H22O5 and a molecular weight of approximately 222.28 g/mol. The boiling point of this compound is around 275 °C, and its melting point is -30 °C. It has a relatively low viscosity, making it easy to handle in various industrial and laboratory processes. The density of tetraethylene glycol dimethyl ether is about 0.998 g/mL at 20 °C. This product is often supplied under high - quality standards with a good price, which makes it an attractive option for many applications.
Tetraethylene glycol dimethyl ether has a wide range of applications. In the field of organic synthesis, it is commonly used as a solvent. Its high boiling point and excellent solubility properties make it suitable for reactions that require high - temperature conditions. For example, it can dissolve many organic compounds, including polar and non - polar substances, facilitating chemical reactions such as esterifications, etherifications, and Grignard reactions. In the battery industry, it is used as an electrolyte solvent. The stability and good ionic conductivity of tetraethylene glycol dimethyl ether contribute to the efficient operation of lithium - ion batteries and other types of rechargeable batteries. Additionally, it can be found in the formulation of cleaning agents and coatings. In cleaning agents, its ability to dissolve various contaminants makes it an effective component for removing stubborn dirt and grease. In coatings, it helps to improve the flow and leveling properties of the paint, resulting in a smoother finish.
When using Factory Supply Tetraethylene glycol dimethyl ether, proper handling procedures should be followed. In a laboratory setting, when using it as a solvent for chemical reactions, it should be measured accurately using appropriate measuring instruments such as graduated cylinders or pipettes. It should be stored in a cool, dry place away from sources of ignition as it is flammable. Before use, it is recommended to check the purity of the product. If necessary, purification steps such as distillation can be carried out. When using it in battery applications, strict quality control is required. The concentration of the electrolyte solution needs to be carefully adjusted according to the specific requirements of the battery design. Personal protective equipment, such as gloves and safety glasses, should be worn to prevent contact with skin and eyes. In the case of accidental contact, immediately rinse the affected area with plenty of water and seek medical attention if necessary.
Let's take a look at a case study in the organic synthesis field. A research group was working on the synthesis of a complex organic compound through an esterification reaction. They chose tetraethylene glycol dimethyl ether as the reaction solvent due to its high boiling point and good solubility for both the reactants and the catalyst. The reaction was carried out at a temperature of 180 °C, which was well within the stability range of the solvent. The reactants were first dissolved in tetraethylene glycol dimethyl ether in a round - bottom flask equipped with a reflux condenser. The reaction mixture was then heated under reflux for several hours. During the reaction, the solvent helped to maintain a homogeneous reaction environment, ensuring efficient contact between the reactants and the catalyst. As a result, the yield of the target ester was significantly higher compared to using other common solvents. After the reaction was complete, the product was easily separated from the solvent through distillation because of the large difference in boiling points between the product and tetraethylene glycol dimethyl ether.
If you have any questions or need further information about Factory Supply Tetraethylene glycol dimethyl ether CAS 143 - 24 - 8, please feel free to contact us. Our email address is info@vivalr.com, and our phone number is (86) 15866781826. We are committed to providing you with high - quality products and professional services.
This is William, CEO of Zhishang Chemical Co., Ltd.
Welcome to visit our factory . As the top chemical manufacturer, we have been striving for product quality, innovation , R&D, and customer service for the past 7 years. In the next 10 years or even longer, we are committed to becoming the most reliable chemical supplier in the world , creating a well-known international brand trusted by customers, with the spirit of “one meter wide, ten thousand meters deep”, we continue to focus on product research and development, continue to focus on customer service, continue to improve the supply chain service system, to create a professional chemical supply service team, to achieve win-win long-term cooperation. Please feel free to contact us if you have any questions.
English (United States) 
English (Australia) 
Portuguese 
Spanish