Our product is High Quality ZINC LAURATE with the CAS number 2452 - 01 - 9. It is available at a low price, which makes it a cost - effective choice for various industries. Zinc laurate is an organic compound with the chemical formula Zn(C₁₂H₂₃O₂)₂. It appears as a white, fine powder under normal conditions. The melting point of zinc laurate is around 120 - 125 °C. It has good solubility in common organic solvents such as benzene, toluene, and chloroform but is insoluble in water.
We ensure high - level quality control during the production process. The purity of our zinc laurate is typically above 98%, which guarantees its excellent performance in different applications. The particle size of the powder is carefully controlled to ensure uniform dispersion and better reactivity.
1. **In the Rubber Industry**: Zinc laurate is widely used as an activator in the rubber vulcanization process. It can increase the cross - linking density of rubber, thereby improving the mechanical properties of rubber products, such as tensile strength, tear strength, and abrasion resistance. It also helps to reduce the vulcanization time and improve the production efficiency of rubber products.
2. **In the Cosmetics Industry**: Due to its good lubricity and water - repellent properties, zinc laurate is used in cosmetics such as lipsticks, eye shadows, and powders. It can improve the spreadability of cosmetics on the skin, give a smooth and soft feeling, and prevent the cosmetics from caking.
3. **In the Plastics Industry**: It can act as a lubricant and stabilizer in plastics. It reduces the friction between plastic particles during the processing, which helps to improve the flowability of plastics and prevent the adhesion of plastics to the processing equipment. At the same time, it can also enhance the weather resistance and thermal stability of plastics.
1. **In Rubber**: When using zinc laurate in the rubber industry, it can be added directly to the rubber compound during the mixing process. The recommended dosage is usually 0.5 - 3 parts per hundred parts of rubber (phr). The specific dosage needs to be adjusted according to the type of rubber, the vulcanization system, and the required performance of the rubber products. After adding, mix thoroughly to ensure uniform dispersion of zinc laurate in the rubber compound.
2. **In Cosmetics**: In cosmetics formulation, zinc laurate should be added during the mixing stage of the raw materials. It can be pre - dispersed in a suitable solvent or mixed directly with other powder ingredients. The dosage is usually determined based on the specific requirements of the cosmetic product, generally ranging from 1% - 5%.
3. **In Plastics**: For plastics processing, zinc laurate can be added during the plastic extrusion or injection molding process. It can be mixed with plastic resin in the form of powder or masterbatch. The typical dosage is about 0.1 - 1% of the total weight of the plastic, depending on the type of plastic and the processing conditions.
1. **Rubber Tire Production**: A well - known tire manufacturer used our zinc laurate in the production of radial tires. They added 2 phr of zinc laurate to the rubber compound. After vulcanization, the tires showed a 15% increase in tensile strength and a 20% improvement in abrasion resistance compared to the previous formula without zinc laurate. The production cycle was also shortened by 10% due to the faster vulcanization speed, which significantly improved the production efficiency and product quality.
2. **Cosmetic Lipstick Production**: A cosmetic company incorporated 3% of our zinc laurate into their lipstick formula. The lipstick became easier to spread on the lips, with a smoother texture and better color pay - off. Consumers reported that the lipstick lasted longer on the lips and did not feel greasy or sticky. As a result, the sales of this lipstick product increased by 25% within a few months.
3. **Plastic Pipe Extrusion**: A plastic pipe manufacturing company added 0.5% of zinc laurate to their PVC pipe extrusion process. The flowability of the PVC compound was greatly improved, and the surface of the extruded pipes became smoother. The pipes also
This is William, CEO of Zhishang Chemical Co., Ltd.
Welcome to visit our factory . As the top chemical manufacturer, we have been striving for product quality, innovation , R&D, and customer service for the past 7 years. In the next 10 years or even longer, we are committed to becoming the most reliable chemical supplier in the world , creating a well-known international brand trusted by customers, with the spirit of “one meter wide, ten thousand meters deep”, we continue to focus on product research and development, continue to focus on customer service, continue to improve the supply chain service system, to create a professional chemical supply service team, to achieve win-win long-term cooperation. Please feel free to contact us if you have any questions.
English (Australia) 
English (United States) 
Portuguese 
Spanish