User Guide for Factory Supply 2,6-bis(3-(9h-carbazol-9-yl)phenyl)pyridine cas 1013405-24-7 With Best Price

1. Basic Information and Parameters
2. Product Uses
3. Product Usage
4. Usage Case Studies
5. Contact Information

Basic Information and Parameters

The product, Factory Supply 2,6-bis(3-(9h-carbazol-9-yl)phenyl)pyridine with CAS number 1013405-24-7, is a high - quality chemical compound. Its chemical formula can be derived from its name, and it consists of a pyridine core with two 3-(9h-carbazol-9-yl)phenyl groups attached at the 2 and 6 positions.

Regarding its physical properties, while specific data such as melting point, boiling point, and solubility need further detailed laboratory analysis, it is generally expected to have properties typical of similar carbazole - containing aromatic compounds. In terms of purity, our factory supply ensures a high - level of purity, which is crucial for its applications.

Product Uses

This product has a wide range of applications in the field of organic electronics. One of the main applications is in organic light - emitting diodes (OLEDs). In OLEDs, it can serve as a hole - transporting material. The carbazole moieties in its structure have good hole - transporting ability, which helps to balance the charge injection and transport in the OLED device, improving the device's efficiency and stability.

It can also be used in the preparation of organic photovoltaic (OPV) cells. In OPV cells, it can act as an electron - donating or hole - transporting material, promoting the separation and transport of photogenerated excitons, thereby enhancing the power conversion efficiency of the solar cell.

Product Usage

When using this product, proper handling procedures should be followed. Firstly, it should be stored in a cool, dry, and well - ventilated place, away from direct sunlight and sources of heat. Before use, it is recommended to check the product's appearance and purity to ensure its quality.

For applications in OLEDs or OPV cells, it usually needs to be dissolved in appropriate organic solvents, such as toluene or chlorobenzene. The concentration of the solution should be carefully controlled according to the specific requirements of the device fabrication process. Then, the solution can be deposited onto the substrate by methods such as spin - coating or ink - jet printing.

During the deposition process, parameters such as spin speed, time, and environmental conditions should be optimized to obtain a uniform and high - quality film.

Usage Case Studies

Case 1: OLED Manufacturing

In a research project on OLEDs, a team used our Factory Supply 2,6-bis(3-(9h-carbazol-9-yl)phenyl)pyridine as the hole - transporting layer. After optimizing the solution concentration and spin - coating parameters, they fabricated OLED devices with a maximum external quantum efficiency (EQE) of 25%. The devices also showed good stability, with a half - lifetime of over 10,000 hours at a constant current density of 10 mA/cm². This indicates that our product can significantly improve the performance of OLEDs.

Case 2: OPV Cell Fabrication

A group of scientists was working on OPV cells. They incorporated our product as a hole - transporting material in a bulk - heterojunction OPV cell. By adjusting the processing conditions, they achieved a power conversion efficiency (PCE) of 12%. The cell also showed good resistance to environmental degradation, maintaining over 90% of its initial PCE after 500 hours of continuous illumination. This demonstrates the potential of our product in OPV applications.

Contact Information

If you have any questions or need further information about our Factory Supply 2,6-bis(3-(9h-carbazol-9-yl)phenyl)pyridine, please feel free to contact us. Our email address is info@vivalr.com, and our phone number is (86) 15866781826.