Factory Supply Irganox 3114 (antioxidant 3114) cas 27676-62-6 User Guide

Table of Contents

• 1. Basic Information and Parameters
• 2. Product Uses
• 3. Product Usage
• 4. Product Usage Cases
• 5. Contact Information

1. Basic Information and Parameters

Factory Supply Irganox 3114, also known as antioxidant 3114, has the CAS number 27676 - 62 - 6. This antioxidant is a highly effective and widely - used product in the industry. It is a white to off - white crystalline powder with a molecular formula of C33H38N6O6 and a molecular weight of approximately 634.69 g/mol. The melting point of Irganox 3114 ranges from 182 - 188°C. It has good solubility in some organic solvents such as chloroform, methylene chloride, and toluene, but limited solubility in water. This product is typically supplied in various packaging sizes to meet different customer requirements, ensuring convenient transportation and storage.

2. Product Uses

Irganox 3114 is mainly used as an antioxidant in a variety of polymers and organic materials. In the polymer industry, it can be added to polyethylene (PE), polypropylene (PP), and other polyolefins. By preventing the oxidation of these polymers, it helps to maintain their mechanical properties, such as tensile strength and elongation at break. This is crucial for products made from these polymers, such as plastic pipes, films, and injection - molded parts. In the rubber industry, Irganox 3114 can be used to improve the aging resistance of rubber products. It delays the hardening and cracking of rubber, thereby extending the service life of rubber seals, tires, and conveyor belts. Moreover, it can also be used in adhesives, coatings, and lubricants to protect them from oxidative degradation, enhancing their performance and durability.

3. Product Usage

When using Factory Supply Irganox 3114, it is recommended to add it during the polymer processing stage. For example, in the extrusion or injection - molding process of polyolefins, Irganox 3114 can be pre - mixed with the polymer pellets before feeding them into the processing equipment. The typical dosage depends on the specific application and the requirements of the final product. Generally, the dosage ranges from 0.1% to 1% by weight of the polymer. However, it is advisable to conduct small - scale tests first to determine the optimal dosage. When handling Irganox 3114, appropriate personal protective equipment, such as gloves and goggles, should be worn to avoid direct contact with the skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical advice if necessary.

4. Product Usage Cases

Case 1: A plastic pipe manufacturing company was facing the problem of pipe degradation due to oxidation. After adding Irganox 3114 at a dosage of 0.3% by weight during the extrusion process of polyethylene pipes, the pipes showed significantly improved resistance to environmental stress cracking. The pipes maintained their integrity and mechanical properties even after long - term exposure to sunlight and oxygen, reducing the number of pipe failures and complaints from customers.

Case 2: A tire manufacturing company incorporated Irganox 3114 into its rubber compound at a dosage of 0.5%. The tires exhibited better heat resistance and reduced cracking during high - speed driving and long - distance transportation. This not only enhanced the safety performance of the tires but also extended their service life, resulting in cost savings for both the manufacturer and the end - users.

5. Contact Information

If you have any questions or need further information about Factory Supply Irganox 3114, please feel free to contact us. Our email address is info@vivalr.com, and our phone number is (86) 15866781826. We are committed to providing you with the best service and support.