Factory Supply Silicon Nitride CAS 12033-89-5 With Best Price User Guide

Table of Contents

• Basic Information and Parameters
• Uses of Silicon Nitride
• How to Use Silicon Nitride
• Usage Case Studies
• Contact Information

Basic Information and Parameters

Silicon nitride, with the CAS number 12033 - 89 - 5, is a high - performance ceramic material. It has a molecular formula of Si₃N₄. Silicon nitride exists in two main crystal structures: α - Si₃N₄ and β - Si₃N₄. The α - phase is metastable and can transform into the β - phase at high temperatures.

It has excellent physical and chemical properties. In terms of mechanical properties, it has high hardness, typically around 1600 - 1800 HV (Vickers hardness). Its flexural strength is also remarkable, often ranging from 600 - 1000 MPa. It has a relatively low density, about 3.2 g/cm³, which makes it suitable for applications where weight reduction is required.

Thermally, silicon nitride has a high thermal conductivity, around 20 - 30 W/(m·K), and a low coefficient of thermal expansion, about 3 - 4 × 10⁻⁶ /K. Chemically, it is highly resistant to oxidation and corrosion, even at high temperatures.

Uses of Silicon Nitride

Silicon nitride has a wide range of applications. In the automotive industry, it is used in engine components such as turbocharger rotors. The high - temperature resistance and excellent mechanical properties of silicon nitride allow the turbocharger to operate at higher speeds and temperatures, improving engine efficiency and performance.

In the cutting tool industry, silicon nitride cutting tools are widely used for machining hard materials like nickel - based alloys. Its high hardness and wear resistance make the cutting tools last longer and achieve better machining accuracy.

In the electronics industry, silicon nitride is used as an insulating layer in semiconductor devices. Its excellent dielectric properties and chemical stability help to improve the reliability and performance of electronic components.

How to Use Silicon Nitride

When using silicon nitride in manufacturing processes, proper handling is crucial. For powder - based applications, it is necessary to ensure a clean and dry environment to prevent moisture absorption, which can affect the properties of the final product.

In the sintering process, the temperature and pressure need to be carefully controlled. For gas - pressure sintering, the pressure is usually in the range of 1 - 10 MPa, and the temperature can reach 1700 - 1900 °C. The sintering time also affects the density and performance of the final silicon nitride product.

When machining silicon nitride components, appropriate cutting tools and machining parameters should be selected. Diamond - tipped tools are often used for machining due to the high hardness of silicon nitride. The cutting speed, feed rate, and depth of cut should be optimized to avoid cracking and chipping.

Usage Case Studies

Case 1: Automotive Turbocharger Rotor
A major automotive manufacturer switched from traditional steel turbocharger rotors to silicon nitride rotors. The silicon nitride rotors, with their lower weight and high - temperature resistance, reduced the turbo lag significantly. The engine response time was improved by 20%, and the fuel efficiency increased by 8%. The durability of the turbocharger also improved, with a reduction in maintenance costs by 30% over a 5 - year period.

Case 2: Cutting Tools for Machining Nickel - based Alloys
A machining workshop replaced their carbide cutting tools with silicon nitride cutting tools for machining nickel - based alloys. The silicon nitride cutting tools had a much longer tool life, lasting 5 times longer than the carbide tools. The surface finish of the machined parts was also improved, meeting higher precision requirements. The overall machining efficiency increased by 40%.

Contact Information

If you have any questions about our Factory Supply Silicon Nitride CAS 12033 - 89 - 5, please feel free to contact us:

Email: info@vivalr.com

Phone: (86) 15866781826