High Quality Polyepoxysuccinic Acid CAS 1528-98-7 With Best Price User Guide

Table of Contents

• 1. Basic Information and Parameters
• 2. Product Uses
• 3. Product Usage
• 4. Usage Case Studies
• 5. Contact Information

1. Basic Information and Parameters

Polyepoxysuccinic Acid (PESA) with the CAS number 1528 - 98 - 7 is a high - quality chemical product. It is an environmentally friendly, biodegradable scale inhibitor. The product usually appears as a yellow - brown liquid or solid, depending on the specific formulation. It has a molecular weight that can vary within a certain range, which affects its performance in different applications. The density of the liquid form is typically in the range of 1.1 - 1.2 g/cm³. It shows excellent thermal stability, being able to maintain its properties at relatively high temperatures, usually up to 200°C. This high - temperature resistance makes it suitable for use in many industrial processes where elevated temperatures are involved.

2. Product Uses

Polyepoxysuccinic Acid has a wide range of applications. In the water treatment industry, it is mainly used as a scale inhibitor. It can effectively prevent the formation of scale such as calcium carbonate, calcium sulfate, and barium sulfate in water systems, including industrial cooling water systems, boiler water systems, and reverse osmosis membrane systems. By chelating metal ions in water, it inhibits the precipitation and deposition of scale crystals, thereby extending the service life of equipment and improving the efficiency of heat transfer. In the oil and gas industry, PESA can be used in oilfield injection water treatment to prevent scale formation in pipelines and wellbore, which helps to maintain the normal operation of oil and gas production. Additionally, in the detergent industry, it can be added to detergents as a builder to enhance the detergency by softening the water and preventing the formation of soap scum.

3. Product Usage

When using Polyepoxysuccinic Acid, it is necessary to determine the appropriate dosage according to the specific application scenario and water quality conditions. In industrial cooling water systems, the typical dosage is in the range of 5 - 20 mg/L. Before adding the product, it is recommended to conduct a small - scale test to optimize the dosage. First, dissolve the product in water if it is in solid form. Then, add the solution to the water system through a dosing pump at a stable flow rate. For continuous - operation systems, it is advisable to add the product continuously to maintain a stable concentration. When used in boiler water systems, the dosage may need to be adjusted according to the boiler pressure and water hardness. It is also important to monitor the water quality regularly to ensure that the scale - inhibition effect is achieved.

4. Usage Case Studies

Case 1: An industrial cooling water system in a chemical plant was suffering from serious scale problems. The heat transfer efficiency of the cooling equipment was significantly reduced, resulting in increased energy consumption. After adding Polyepoxysuccinic Acid at a dosage of 15 mg/L, a regular monitoring showed that the scale formation rate decreased by more than 80% within a month. The heat transfer coefficient of the cooling equipment gradually recovered, and the energy consumption was reduced by about 15%.
Case 2: In an oilfield injection water treatment project, the pipeline was frequently blocked by scale deposits, which affected the normal injection of water. By using PESA at a proper dosage, the scale in the pipeline was effectively controlled. After six months of continuous use, the number of pipeline blockages was reduced from once a month to once every six months, greatly improving the efficiency of oilfield production.

5. Contact Information

If you have any questions or need more information about Polyepoxysuccinic Acid, please feel free to contact us. Our email is info@vivalr.com, and our phone number is (86) 15866781826.