Factory Supply Methyl Oleate CAS 112-62-9 With Good Price: User Guide

Table of Contents

• Basic Information and Parameters
• Uses of the Product
• How to Use the Product
• Usage Case Studies
• Contact Information

Basic Information and Parameters

Methyl Oleate (CAS 112 - 62 - 9) is an unsaturated fatty acid methyl ester. It is a clear to pale - yellow liquid at room temperature. The chemical formula of Methyl Oleate is C₁₉H₃₆O₂, and its molecular weight is approximately 296.49 g/mol. This product is factory - supplied with a good price, which makes it an economical choice for various industries.

It has a melting point around - 19°C and a boiling point of about 192 - 195°C at 2 mmHg. The density of Methyl Oleate is about 0.87 g/cm³ at 25°C. It is insoluble in water but soluble in organic solvents such as ethanol, ether, and chloroform. It has a refractive index of about 1.452 at 20°C.

Uses of the Product

In the industrial field, Methyl Oleate is widely used as a lubricant and lubricant additive. It can improve the lubricating performance of metal - working fluids, reducing friction and wear between metal surfaces during machining operations. This helps to increase the lifespan of cutting tools and improve the surface quality of machined parts.

It is also used in the production of soaps, detergents, and surfactants. Methyl Oleate can act as an emulsifier, helping to mix oil and water - based substances evenly. In the cosmetics industry, it is used as an emollient in skin care products. It can form a protective film on the skin surface, preventing moisture loss and making the skin feel soft and smooth.

Moreover, Methyl Oleate is a potential bio - diesel component. Its ability to burn cleanly and its relatively low - toxicity make it an environmentally friendly alternative to traditional diesel fuels.

How to Use the Product

When using Methyl Oleate as a lubricant additive, it should be added to the base lubricant in an appropriate proportion. The exact proportion depends on the specific application and the type of base lubricant. Generally, it is recommended to start with a small amount and gradually adjust according to the performance requirements. For example, in metal - working fluids, the addition amount can range from 5% to 20%.

In the production of soaps and detergents, Methyl Oleate is usually reacted with alkali solutions under specific temperature and pressure conditions. The reaction process needs to be carefully controlled to ensure the quality of the final product. When using it in cosmetics, it should be mixed evenly with other ingredients under sterile conditions to avoid contamination.

Usage Case Studies

Case 1: A metal - machining factory was facing the problem of rapid tool wear and poor surface finish of machined parts. After adding 15% Methyl Oleate to their metal - working fluid, they noticed a significant improvement. The tool life was extended by 30%, and the surface roughness of the machined parts was reduced by 20%. This led to a decrease in production costs and an increase in product quality.

Case 2: A cosmetic company was developing a new moisturizing lotion. By incorporating Methyl Oleate as an emollient, they found that the lotion had better spreadability and a more pleasant texture. Consumer feedback showed that 80% of the testers reported that their skin felt softer and more hydrated after using the lotion for a week.

Case 3: A bio - diesel research project used Methyl Oleate as a major component in their bio - diesel formulation. The bio - diesel produced had a lower sulfur content and higher cetane number compared to traditional diesel. When used in a test vehicle, it showed a 10% improvement in fuel efficiency and a reduction in exhaust emissions.

Contact Information

If you have any questions or need more information about Factory Supply Methyl Oleate CAS 112 - 62 - 9 With Good Price, please contact us:

Email: info@vivalr.com

Phone: (86) 15866781826